The board provides everything you’ll need for Setup Your Raspberry pi 4, and even includes additional parts to connect everything.
You will need a keyboard, a monitor, and possibly a WiFi dongle if you have an older Raspberry Pi and plan to expand its functionality.
This diagram illustrates a Setup Your Raspberry pi 4 computer system, as shown in Figure 1. To connect a second monitor, you could connect the Pi 4 Model B or Pi Zero to a microSD card (used in model B) to use a composite cable.
Instead, if you have only one HDMI or VGA monitor, connect it to the USB-C connector if you intend to use that as your only monitor.
Unlike traditional PCs, the Raspberry Pi is happy with either using a traditional keyboard and mouse or a USB or Bluetooth input device.
The new Raspberry Pi 4 is able to connect displays your screen on a single HDMI monitor as well as two.
The mouses must have an arrangement where the current location of the screens in relation to each other. It can not automatically adjust the mouse placement when you expand one of the screens.
Go to the Screen Display Settings menu, then click the Panel Configuration, and do the following:In the Preferences panel, go to the Display Settings menu and select the Panel.
When you move the two monitors, you can drag the two boxes labeled “HDMI-1” and “HDMI-2” to the locations where you want them to be.
in this instance, the monitors are positioned in this configuration: with the monitor connected to HDMI-1 on the left
To use the model B Raspberry Pi you will also need a USB hub or USB port expanders (depending on your availability).
132 total views, 1 views today