In this tutorial, i will show you how to find IP address of raspberry pi and at the end of this tutorial you learn how to find ip address of raspberry pi without monitor and find ip address of raspberry pi command with a simple 2 Method.
If you went to complet how to find IP address of raspberry pi tutorial you have yo need flowing equpment
Method-1 Connect to a Wired Network
For starters, there is no RJ45 Ethernet connector on a Raspberry Pi (1, 2, or 3), or a Pi Zero, whether you have a model A or A+. In this environment, a wireless USB adapter is your best choice for internet connectivity.
If you have a Model B or B Raspberry Pi, then you have the good news; otherwise, you can only use an Ethernet patch cable to link to an RJ45 port on the router’s unpopulated second socket on the back of the unit and then to your home router.
As soon as the Raspberry Pi connects to the network, the network LEDs will begin to blink.
Using the Dynamic Host Configuration Protocol, Raspbian is preconfigured to connect to any network (DHCP).
As long as DHCP is enabled on your network, it will be assigned an IP address automatically.
Check that DHCP is enabled on your network management console if the LEDs blink but you can’t connect to the internet using a browser on your Raspberry Pi. Look for a choice similar to the one shown in Figure 2.
Method-2 Find IP address of Raspberry pi command line
In a Terminal window, type the following command to find your Raspberry Pi’s IP address:
A Raspberry Pi can have multiple IP addresses. So, if your Pi has both a wired and a wireless connection, it will have two IP addresses.
Normally, however, you would connect it using only one method, not both. Use the ifconfig command to view all network connections:
Looking at the output of the ifconfig command, you can see that the Pi in question is connected to the internet via both a wired connection (eth0) with an IP address of 192.168.1.16 and a wireless connection (wlan0) with an IP address of 192.168.1.13. A virtual interface that allows the computer to communicate with itself is the lo network interface.
150 total views, 1 views today